![]() ![]() (I Assume you have selected an MCS2 controller definition) (enter "ipconfig" command from the command prompt )Ģ) On the CS2 - same IP setting panel as before - Check/Tick the "Start Gateway" box and enter your PCs address in the "Destination Address" fieldģ) After setting the address in the properties dialogue in RocRail/RocView, which I understand you have already done. If it is also provided by your router then the first 3 numbers are probably the same as that of the CS2. This needs to be authorised and it is possible that Vista/Firewall, which is overbearing in this area, has blocked the port(s)īut before we assume anything amiss there, there are 2 more steps and some tests that may belpġ) Identify the address of your PC. More importantly this setup requires a communication path between the Server(RocRail) and Client(RocView) (Even if they are on the same machine. That's just background but it may explain why there are 2 parts. Most commonly they run together on the same machine, however multiple RocViews from different machines may funnel through the single RocRail server. RocView is the client that connects to the RocRail server. RocRail is the background "Engine" that communicates with the Controllers What Operating System are you running on your PC ?įrom you description you have started both RocRail and RocView. (where is the address you discovered earlier One test you can do to see if your PC and CS2 are "on the same page" is to issue a (Unless you reply otherwise I will presume you are set to automatic. Manually - you will need to manually set ans address and mask (template). NOTE this number and use it in the RocRail properties setup Automatically - then the CS IP Address field will have a number pre-filled (supplied by your router). Note if Address assignment is manually or automatic Name and how do I know if my router and everything is working properly? Can this work? Also, what addresses do I need to put in the host I have a router, not connected to the internet, but connected Click supported Command Stations for a list of currently supported Command Stations.I am having a lot of trouble setting up Rocrail with CS. Rocrail runs on a computer connected to the layout by one of the standard computer interface setups, and supports many controllers. ![]() Due to Rocrail's client-server architecture, control of a layout from any computer or mobile device on a home network or over the Internet is possible. ![]() These programs communicate with each other using TCP/IP, and they do not need to be on the same computer. Rocrail consists of two programs The Rocrail Server and the Rocview Client. Many have found that running some of the trains on the layout automatically while operating others manually is most enjoyable. Running trains manually or automatically is fully configurable. Rocrail can control a model train layout from one or more computers. Written in C/C++, it is based on the _images_blocks2.jpgwxWidgets class library. Rocrail is an Innovative Model Railroad Control System that runs on Linux, Mac OS X, Raspberry Pi and Windows. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |